AIRAC0906 - Umbau EDMM-Süden/LSAS/LOVV

Hallo zusammen

Wie ihr hier nachlesen könnt, wird es im östlichen Teil von unserem Luftraum zu grösseren Änderungen kommen: http://board.vacc-sag.org/14/37406.

Es ist zeitlich unmöglich diese Änderungen fristgerecht zu übernehmen da auch wir den neuen AIRAC erst morgen besorgen können (welcher die Grundlage für das neue Sektorfile ist).
Ausserdem ist das Ganze auch mit Arbeit für das Operation-Departement verbunden welche die Files erstellen, ggf. korrigieren und zuerst noch testen muss.
Bitte achtet auf die diversen Neuerungen (zB. Fix ALGOI) und lasst euch nicht unterkriegen :). Wir beeilen uns damit ihr bald wieder 100% up2date seid.

Weitere Infos folgen, Grüsse

New AIRAC Cycle 0907



Major changes in airspace between Munich and Zurich
Several TMAs and CTRs overworked
Download: http://www.vacc.ch/uploads/Files/atc-files/Sectorfiles/LSAS_0907_2.zip

kleine Bemerkung: du meinst doch sicher 0907 :P :D

Schöne Grüsse, Andreas

EDIT: achja, und mir ist gerade aufgefallen, dass beim neuen sectorefile fürs VRC die Runwaycenterlines nicht ganz bei der korrekten Position sind...nur kleine Anmerkung B-)

Hallo zusammen

www.vacc.ch/uploads/Files/atc-files/Sectorfiles/LSAS_0907_2.zip

Folgende Fehler sind korrigiert:
- Falsche Centerlines
- Airports nicht sichtbar

2 Fragen: Ist der ES sector file still old (the one published) or is a new one (this who were using the people of the beta program) ?
Is mandatory to update this sectorfile? where can we see a detailed changelog?

Hello Giorgio

It is NOT the Sectorfile of the ES-Betatest programm. There is no detailed changedlog. The only one we can provide you is the one in the posting of Pascal above. Updating is not mandatory but you must be able to provide the same quality of service that you can provide with this sectorfile. All CTR-Controllers (LSAS_CTR) should update because of the changes between Zurich and Munich. But also TWR and APP Controllers are recommended to update because of the updated TMA and CTRs. As a TWR controller for example you must know the exact position of your CTR (=Control Zone)


But why don't you just update?

Quote:

---

Originally Posted by Raffael Walther (816737)

Hello Giorgio

But why don't you just update?

---

Because I did some special changes to the VRC/ old and not nice ES sct so, if I have to update everything I'll lose some time to replace my modifications in the new sectors.. so I'm asking myself if it's so important because now I really don't have time/want to do this (stupid) work

Hello Giorgio


We just provide a standard sectorfile that contains everyting you need to do ATC. A controller can of course make modifications to this file. But such modifications including any work connected with it are clearly in the responsibility of the controller. So there are three possibilities if you don't have time for this work:

1. Use the new sectorfile
2. Don't do ATC until you have time to do the modifications
3. Check if updating is necessary before doing ATC on a position with your sectorfile (it's your own job to know how to do this....)

As I said, you can use any sectorfile as long as you can ansure the same quality of service.