Ergebnis 1 bis 3 von 3

Thema: Unidentified AC tag

  1. #1
    vACC-Mentor
    vACC-Controller
    vACC-Pilot
    Avatar von Ky Do (1398392)

    Registriert seit
    04.12.2017
    Ort
    Genf
    Beiträge
    29
    Thanks
    119
    Thanked 25 Times in 21 Posts

    Standard Unidentified AC tag

    Hello,

    During the solo APP sessions in Geneva. I've encountered several aircraft without the full tag (only shows speed and altitude/level). I was unable to assume the tfc, the only option available was "correlate" which I assume has nothing to do with my position. I was quite frustrated as it makes me confused between the tfc inside my area of responsibility and those who weren't. When I use the flight strip (F6 Key), it shows the AC is "Unidentified". Did I miss something during the APP lesson? Thanks for your help.

    Kind regards,
    Ky

  2. #2
    vACC-Staff
    vACC-Examiner
    vACC-Mentor
    vACC-Controller
    vACC-Pilot
    Avatar von Mike Welten (971511)

    Registriert seit
    24.11.2008
    Ort
    E of LSME
    Beiträge
    2.246
    Thanks
    1.691
    Thanked 3.765 Times in 1.361 Posts

    Standard

    Hello Ky

    It looks like you are using the professional mode of Euroscope, which activates the correlation feature.

    Go to the "General Settings", Page1 on the bottom: "Correlation Mode" and change it to Easy.
    Then all aircrafts will be correlated without any action required from your side.

    Regards
    Mike
    Mike Welten
    Leader Technology Department. vACC Switzerland

    The engine is the heart of an aeroplane, but the pilot is its soul.

  3. Danksagungen

    Ky Do (20.01.2020)

  4. #3
    vACC-Staff
    vACC-Examiner
    vACC-Mentor
    vACC-Controller
    vACC-Pilot
    Avatar von Jonas Kuster (1158939)

    Registriert seit
    22.06.2010
    Ort
    Dübendorf
    Beiträge
    2.691
    Thanks
    1.971
    Thanked 5.413 Times in 1.874 Posts

    Standard

    The Professional Mode of EuroScope is activated by default since the AIRAC 2001 release as announced in this forum. For correlation, a unique squawk code is required. As soon as the pilot has set such a code, the corresponding label will be shown with the option to assume the tag. You may use the correlation function to create the link between a target and a flight plan manually. For an uncorrelated traffic approaching your area, you may use the flight plan list to determine what flight this could be and to send him a "contact me" message.
    Jonas Kuster Leader Operation - vACC Switzerland | www.vacc.ch

  5. Danksagungen

    Ky Do (20.01.2020)

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •